Maideson M-370 Full-Servo PUR Edge Banding Machine with Steel-Beam Track

M-370
Heavy-duty full-servo edge bander with steel rail and beam construction, dual-channel band feeding, PUR gluing, servo pressing and single-motor corner rounding. Handles 8-60 mm panels at 18/22/26/30 m/min with a 21-inch operator screen.
Quantity
Contact Now

Maideson M-370 Full-Servo PUR Edge Bander

Steel-rail construction, a tracked pressure beam and coordinated servo drives support panel-furniture production. Process panels 8–60 mm thick with selectable feed speeds of 18, 22, 26 or 30 m/min.

Maideson M-370 full-servo edge bander

Machine Video

Designed for Repeatable Panel Finishing

A 21-inch operator screen, automatic thickness detection and dual-channel band feeding simplify setup. PUR gluing, servo five-wheel pressing and servo corner rounding are integrated with trimming, scraping, cleaning and two polishing stages.

Laser edge banding is available as an optional configuration. Contact us to match the configuration to your panel material and edge-band requirements.

Functional Units

M-370 Annealed Steel-Rail Frame

Annealed Steel-Rail Frame

An integral welded steel frame is annealed to relieve residual stress. The steel rail and beam provide the reference surfaces for panel conveying and processing.

M-370 21-Inch Operator Screen

21-Inch Operator Screen

An Inovance control interface brings machine settings together on a 21-inch display. A three-color lamp shows fault, operating and standby status.

M-370 Servo Infeed Side Guide

Servo Infeed Side Guide

A 0.4 kW servo positions the infeed guide. Dual linear guides and bearings support repeatable pre-milling depth adjustment.

M-370 Automatic Thickness Detection

Automatic Thickness Detection

The sensor measures panel thickness and gives an early warning when deviation exceeds 0.2 mm.

M-370 Release-Agent Application

Release-Agent Application

Position-triggered application helps keep adhesive from sticking to the panel face during subsequent processing.

M-370 Dual-Motor Diamond Pre-Milling

Dual-Motor Diamond Pre-Milling

Two 2.2 kW spindles at 12,000 rpm prepare the cut edge. A heavy base supports the LEUCO diamond cutters and an air-blowing system clears dust after milling.

M-370 Hot-Air Edge Preheating

Hot-Air Edge Preheating

Preheating supports adhesive activation and bonding in cooler workshop conditions.

M-370 Dual-Channel Servo Band Feeding

Dual-Channel Servo Band Feeding

Servo feeding supports quick selection between two band channels. Sensors monitor band availability and a directional reel guides the tape.

M-370 PUR Gluing

PUR Gluing

The gluing unit uses a 0.75 kW drive. Servo-controlled feeding and band detection support tape positioning and give an alert if the band fails to pass correctly. Laser edge banding is an optional configuration.

M-370 Servo Five-Wheel Pressing

Servo Five-Wheel Pressing

Five pressing rollers are positioned by a 0.4 kW servo. The cylinder-free pressing arrangement supports consistent roller force.

M-370 Heavy-Duty Rough Trimming

Heavy-Duty Rough Trimming

Twin 0.8 kW motors at 12,000 rpm remove excess tape. A reinforced base and directed chip removal prepare the edge for fine trimming.

M-370 Servo Fine Trimming

Servo Fine Trimming

Twin 0.8 kW motors at 12,000 rpm trim the upper and lower edges. The reinforced assembly supports repeatable tool adjustment.

M-370 Profile Scraping

Profile Scraping

A heavy-duty horizontal scraping assembly uses LEUCO R1.5 scraping blades and directed air blowing to clear shavings.

M-370 Three-Axis Flat Scraping and Cleaning

Three-Axis Flat Scraping and Cleaning

Pneumatic flat scraping removes remaining adhesive near the edge. The cleaning spray is triggered by panel position before polishing.

M-370 Servo Horizontal End Trimming

Servo Horizontal End Trimming

Two 0.55 kW motors drive the end saws at 12,000 rpm. The servo following motion supports trimming of small and narrow panels.

M-370 Single-Motor Servo Corner Rounding

Single-Motor Servo Corner Rounding

A magnetic-levitation servo following assembly shapes the panel-end corners. A single processing head provides a continuous cutting path.

M-370 Four-Motor Vertical Polishing

Four-Motor Vertical Polishing

Four 0.37 kW motors at 2,840 rpm drive two vertical polishing stages. Linear guides assist wheel positioning and replacement.

M-370 Machined Steel Rail and Beam

Machined Steel Rail and Beam

Annealed rails and an integral beam are machined to provide stable assembly references. Hardened rail surfaces support wear resistance.

M-370 Tracked Pressure Beam

Tracked Pressure Beam

A broad contact area presses and conveys the panel synchronously, supporting thin, narrow and large panels.

M-370 7.5 kW Servo Conveyor

7.5 kW Servo Conveyor

The field-bus servo drive coordinates panel position with the processing units.

M-370 Servo Pressure-Beam Lift

Servo Pressure-Beam Lift

A 0.4 kW Inovance servo and geared drive set beam height. Encoder memory supports repeatable positioning for different panel thicknesses.

M-370 Five Heavy-Duty Lift Columns

Five Heavy-Duty Lift Columns

Five columns with worm-gear slide-rail lifts distribute the pressure-beam load.

M-370 30 L Air Stabilization System

30 L Air Stabilization System

Two internal air tanks stabilize the air supply before it is distributed to the pneumatic units.

M-370 Electrical Controls

Electrical Controls

Inovance integrated bus control and Delixi electrical components form the core control arrangement.

M-370 Panel Position Encoder

Panel Position Encoder

A Honeywell encoder records panel position and conveying speed for process coordination.

Technical Specifications

ModelM-370
BrandMaideson
Dimensions (L × W × H)9000 × 950 × 1750 mm
Total power32 kW
Edge-band thickness0.4–3 mm
Panel thickness8–60 mm
Minimum panel width40 mm
Minimum panel length150 mm
Feed speeds18 / 22 / 26 / 30 m/min
Net weight5500 kg
Dust ports5 × Ø100 mm
Air inlets2 × Ø12 mm
Power supply380 V, 50 Hz, 3-phase
Operator screen21 inches
Interface languagesChinese and English

Discuss Your Production Requirements

Share your panel sizes, edge-band materials, output target and delivery destination. We can confirm the suitable configuration, packed dimensions and shipment arrangement for your order.

Download M-370 specifications and functional units (PDF)