MingD MD-EM1 2026 Compact Automatic Edge Banding Machine
2026 VERSION · COMPACT AUTOMATIC EDGE BANDING
MD-EM1: Complete Edge Finishing in a Compact Footprint
The MingD MD-EM1 brings gluing, pressing, end trimming, fine trimming, profile scraping, flat scraping and polishing into a 3340 mm-long machine. It is designed for straight-edge finishing of panels used in cabinets, wardrobes and other panel furniture.
Why Choose the 2026 MD-EM1?
- Compact 3340 x 750 mm machine footprint for workshop planning.
- 12 / 18 / 23 m/min selectable feed speeds.
- Processes panels 10-60 mm thick with edge band 0.4-2 mm thick.
- 7-inch touch screen and electric pressure-beam adjustment.
- EVA glue tank with drain function, followed by trimming, scraping and polishing.
- Dedicated steel-frame packing supports two-tier container loading.
One Straight-Edge Finishing Workflow
EVA gluing → Pressing → Front/rear end trimming → Fine trimming → Profile scraping → Flat scraping → Polishing
Functional Units in Detail
Explore the gluing, trimming, scraping and polishing units, together with the controls and panel-handling systems.
01
7-Inch Touch Screen
A 7-inch touch screen brings the operating interface and machine settings together. The specified interface supports Chinese and English.
02
EVA Gluing Unit
A 0.75 kW motor drives the gluing unit. The 1.5 L glue tank includes a drain function for adhesive changes and maintenance; the 0.8 mm mesh-pattern application roller supports even glue coating.
03
Two-Wheel Pressing Unit
The eccentric-wheel and rubber-wheel arrangement presses the edge band against the panel after gluing, supporting firm contact along the edge.
04
Front and Rear End Trimming
Two 0.37 kW motors at 12,000 rpm trim excess band at the leading and trailing ends. The unit uses quick pressure relief and dual air circuits.
05
Fine Trimming with R2 Profile
Two 0.75 kW motors at 12,000 rpm remove excess edge band and shape the edge profile. Manual digital-scale adjustment helps set the trimming tools; the specified cutters have an R2 profile.
06
Profile Scraping
Carbide scraping tools remove fine trimming marks from the edge band for a smoother surface after fine trimming.
07
Flat Scraping for Glue Residue
The flat scraping assembly uses two upper and two lower tools to remove excess glue from the panel surfaces adjacent to the edge.
08
Dual-Motor Polishing
Two 0.37 kW motors at 2,840 rpm drive polishing wheels to finish the banded edge. The wheel arrangement provides a broad contact area and convenient wheel replacement.
09
2.2 kW Conveyor Drive
The conveyor motor moves panels through the processing units. Its 2.2 kW drive supports consistent panel feeding at the selected operating speed.
10
Electric Pressure-Beam Adjustment
A 0.37 kW lifting motor adjusts the pressure beam for changes in panel thickness. A digital readout helps the operator check the setting and reduces manual adjustment work.
Technical Specifications
| Model | MD-EM1 (2026 version) |
|---|---|
| Machine dimensions | 3340 x 750 x 1400 mm |
| Total power | 8 kW |
| Air pressure | 0.6 MPa (approx. 6 bar) |
| Air inlet specification | 12 mm x 2 |
| Edge-band thickness | 0.4-2 mm |
| Panel thickness | 10-60 mm |
| Minimum panel width | 60 mm |
| Minimum panel length | 120 mm |
| Feed speeds | 12 / 18 / 23 m/min |
| Machine weight | 1000 kg |
| Dust extraction ports | 100 mm x 2 |
| Power supply | 380 V, 50 Hz, 3-phase |
| Touch screen | 7 inches |
| Interface languages | Chinese and English |
| Glue type / tank capacity | EVA / 1.5 L |
Selected Control & Electrical Components
- Encoder: Autonics
- PLC: Delta
- Limit switch: Omron
- Contactors: Schneider Electric
- Inverter: Simphoenix
- Pneumatic air treatment and solenoid valves: Pneulead
PACKING & CONTAINER LOADING
Two Tiers. Better Use of Container Height.
The MD-EM1 can be prepared with dedicated steel support frames for two-tier container loading. These actual packing photographs show the stacking arrangement in the workshop and inside a container.
Dedicated Steel Frames for Two-Tier Stacking
The workshop photograph shows wrapped machines stacked in two tiers using dedicated steel support frames. The frame structure supports the upper tier rather than placing it directly on the lower machine's enclosure. This arrangement makes use of vertical space during shipment preparation.
Two-Tier Container Loading in Practice
The container photograph shows packaged machines arranged on two levels. For MD-EM1 shipments, the dedicated steel-frame arrangement allows two-tier loading to use more of the available container height and can reduce the shipping space required per machine. Final loading quantity and layout depend on the container, packed dimensions, total weight and securing plan.
Ask us to plan the loading arrangement for your order. Two-tier loading uses the dedicated steel frames; the suitable container type, packed dimensions, loading quantity and cargo securing are confirmed for the shipment.
Plan Your Edge-Banding Setup and Shipment
Share your panel sizes, edge-band material, daily output target and delivery destination. Our team can discuss the MD-EM1 configuration and steel-frame loading arrangement for your order.