MingD MD-EM4 2026 Automatic Edge Bander with Pre-Milling and Corner Rounding
Pre-Milling Through Corner Rounding in One Pass
The 2026 MingD MD-EM4 finishes straight panel edges for cabinets, wardrobes and other panel furniture. Select one of three feed speeds to match the job. The 5.5 m machine combines edge preparation, EVA application and finishing, including automatic rounding at the panel ends.
Edge-Banding Sequence
Pre-milling → EVA gluing → Pressing → End trimming → Fine trimming → Corner rounding → Profile scraping → Flat scraping → Polishing
Functional Units
10-Inch Touch Screen
Set operating parameters and select functions from the touch screen. The machine interface supports English and Chinese.
Diamond Pre-Milling
Two 2.2 kW motors run in opposite directions to remove cutting burrs and prepare the panel edge for gluing.
EVA Lower Glue Pot
The 1.5 L tank has a drain for glue changes. A textured applicator roller spreads EVA adhesive along the panel edge.
Four-Wheel Pressing
An eccentric roller and rubber rollers press the band against the glued panel edge.
Front and Rear End Trimming
Twin saw units cut excess tape at both ends of the panel. Quick pressure relief and two air circuits control the trimming motion.
Fine Trimming
Six-flute radius cutters shape the upper and lower edges. A digital position indicator helps the operator reproduce tool settings.
Tracking Corner Rounding
A steel tracking assembly follows the panel ends to round all four corners.
Profile Scraping
Carbide scrapers smooth fine cutter marks left on the rounded edge profile.
Flat Scraping
Two upper and two lower tools remove stray adhesive along the edge.
Polishing
Two polishing wheels buff the edge band after trimming and scraping.
Panel Conveyor
A 2.2 kW conveyor drive feeds the panel through the work stations at 12, 18 or 23 m/min.
Electric Pressure Beam
The electric lift sets the beam height for different panel thicknesses. A position indicator helps repeat a previous setting.
Technical Specifications
| Model | MD-EM4 (2026 version) |
|---|---|
| Machine dimensions | 5500 × 800 × 1400 mm |
| Total power | 12.5 kW |
| Operating air pressure | 0.6 MPa (6 bar) |
| Air inlet | Ø12 mm × 2 |
| Edge-band thickness | 0.4–2 mm |
| Panel thickness | 10–60 mm |
| Minimum panel width | 60 mm |
| Minimum panel length | 200 mm |
| Selectable feed speeds | 12 / 18 / 23 m/min |
| Net weight | 1760 kg |
| Dust outlets | Ø100 mm × 3 |
| Power supply | 380 V, 50 Hz, 3-phase |
| Touch screen | 10 in |
| Interface languages | English and Chinese |
Packing and Container Planning
The machine measures 5500 × 800 × 1400 mm before packing. For a shipment quote, share the destination and quantity so we can confirm the packed dimensions, container choice and loading arrangement.
Download the MD-EM4 2026 specifications and configuration (PDF)